CWNP CWNA-109 dumps - 100% Pass Guarantee!

Correct Answer: C

A common feature of MDM solutions that can be used to protect enterprise data on mobile devices is containerization. Containerization is a technique that creates a separate and secure environment on the mobile device where enterprise data and applications are stored and accessed. Containerization isolates the enterprise data from the personal data and prevents unauthorized access, leakage, or loss of sensitive information. Containerization can also enforce security policies, encryption, authentication, and remote wipe on the enterprise data and applications. Over-the-air registration, onboarding, and self-registration are features of MDM solutions that facilitate the enrollment and management of mobile devices, but they do not directly protect enterprise data on mobile devices. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 336; [CWNA: Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 326.

Correct Answer: C

In the 2.4 GHz frequency band used for 802.11 wireless networks, the channel bandwidth is typically 20 MHz, but the actual frequency spread of each channel is about 22 MHz due to the modulation techniques used. This spread causes

overlap between adjacent channels, which can lead to interference and degrade network performance. To avoid this, it's essential to use non-overlapping channels.

The three non-overlapping channels in the 2.4 GHz band are 1, 6, and 11. Each of these channels is spaced sufficiently apart to avoid interference with each other:

Channel 1: Centered at 2.412 GHz.

Channel 6: Centered at 2.437 GHz.

Channel 11: Centered at 2.462 GHz.

Given the options provided, option C (1 and 5) is the closest to a pair of non-overlapping channels, although in practice, channel 5 would still cause some interference with channel 1 due to the 22 MHz spread. The ideal choice for non-

overlapping channels would be any two channels among 1, 6, and 11, but this is not an option provided. Therefore, within the given options, 1 and 5 are the best choice, understanding that in a real-world scenario, 1 and 6 or 6 and 11 would

be preferred to avoid overlap.

References:

CWNA Certified Wireless Network Administrator Official Study Guide:

ExamCWNA-109, by David D. Coleman and David A. Westcott. Understanding 2.4 GHz channel arrangement and interference patterns in 802.11 wireless networks.

Correct Answer: B

This is because the passphrase for WPA2-Personal is case-sensitive and must match exactly on both the AP and the client. If the passphrase is entered incorrectly on the client, the client will not be able to authenticate with the AP and connect to the network. The AP that covers the problem area is not likely to require a firmware update, fail, or be improperly configured, as it is online and works with other clients that have the correct passphrase. To troubleshoot this issue, you can check the passphrase settings on the clients and make sure they matchwith the AP. You can also try to reconnect the clients to the network or reboot them if necessary. For more information on how to configure WPA2-Personal on your router

Correct Answer: A

PoE stands for Power over Ethernet, which is a technology that allows network devices to receive power and data over the same Ethernet cable. PoE eliminates the need for separate power adapters or outlets for devices such as IP phones, cameras, or APs. PoE requires two types of devices: PSE (Power Sourcing Equipment) and PD (Powered Device). A PSE is a device that provides power to the Ethernet cable, such as a switch, injector, or splitter. A PD is a device that receives power from the Ethernet cable, such as an IP phone, camera, or AP. When implementing PoE, a switch plays the role of a PSE910. References: CWNA-109 Study Guide, Chapter 7: Power over Ethernet (PoE), page 293; CWNA109Study Guide, Chapter 7: Power over Ethernet (PoE), page 287.

Correct Answer: C

The HT (802.11n) physical layer (PHY) specification includes support for and compatibility with both ERP and HR/DSSS. ERP stands for Extended Rate PHY, which is an extension of the original DSSS (Direct Sequence Spread Spectrum) PHY that supports data rates up to 54 Mbps in the 2.4 GHz band. HR/DSSS stands for High Rate/Direct Sequence Spread Spectrum, which is another extension of DSSS that supports data rates up to 11 Mbps in the 2.4 GHz band. HT stands for High Throughput, which is a new PHY that supports data rates up to 600 Mbps in both the 2.4 GHz and 5 GHz bands. HT uses OFDM (Orthogonal Frequency Division Multiplexing) as its modulation scheme, but it also supports legacy DSSS and ERP devices by using a dual preamble and header structure that allows backward compatibility. References: , Chapter 3, page 103; , Section 3.1