1Z0-1075-22 Online Practice Questions and Answers

Identify the two configurations in Supply Chain cloud applications of Product Information Management (PIM) and Order promising (GOP), which must be set to process the Back-to-Back order with Make Supply Order, for a nonstocked item.

A. Set the nonstocked item to be back-to-back enabled in Product Information Management (PIM).

B. Set the global sourcing rule in GOP to determine supply creation option as Make.

C. Set a local sourcing rule in GOP to determine supply creation option as Make.

D. Create Supply Order Orchestration Defaulting and Enrichment Rule for the nonstocked item.

E. Create Supply Chain Orchestration Supply Execution Document Creation Rule for the nonstocked item.

You are monitoring the production status on your shop floor. The production operator informs you that a particular resource that was not functioning for the past week is now back in operation. Which option shows the steps to quickly release the work orders affected by this operation, which were put on hold using the mobile application?

A. Select the infotile On Hold> Select a work order you want to release> Select the work order operation on hold > Swipe left on the work order name> Tap or click the Release action, and click OK

B. Select the infotile On Hold> Select a work order you want to release> Swipe left on the work order name> Tap or click the Release action, and click OK

C. Select the infotile Unreleased> Select a work order you want to release>Swipe left on the work order name> Tap or click the Release action, and click OK

D. Select the infertile Dispatch List> Select a work order operation you want to release> Swipe left on the work order name> Tap or click the Release action, and click OK

A plant runs 24x7 daily using three continuous shifts of 8 hours each. One unit of an equipment resource R1 is assigned to each of the three shifts. On a specific work order, the resource R1 is required to work for 2 hours. The resource is set up with an efficiency of 50% and utilization of 100%. R1 is scheduled to start on the given work order at noon. What time will R1 be scheduled to finish, assuming no calendar exceptions have been set?

A. 8:00 PM

B. 12:30 PM

C. 2:00 PM

D. 4:00 PM

E. 1:00 PM

Identify three entities that must be set up in Oracle Manufacturing Cloud to create a Work Definition for an item that will be manufactured in-house.

A. Operation Items

B. Resources

C. Production Line

D. Operations

E. Manufacturing Lead Time

A customer has a distribution warehouse (DW) for After Sales and Service and an in-house manufacturing plant (MP). Sales orders are created and shipped from DW. Identify the two Sourcing Rules that need to be set for order promising to schedule the order.

A. Define Local sourcing rule for organization MP: Source Type Make At, Source MP

B. Define Local sourcing rule for organization DW: Source Type Make From, Source MP

C. Define Local sourcing rule for organization MP: Source Type Transfer To, Source DW

D. Define Local sourcing rule for organization DW: Source Type Transfer From, Source MP

An employee is responsible for dealing with different manufacturing practices and processes, machines, tools and equipment that turn raw material into a product. Which seeded job role must this employee be provided with?

A. Manufacturing Engineer

B. Production Engineer

C. Production Operator

D. Manufacturing Supervisor

E. Production Supervisor

You are setting up Fusion Manufacturing to support Back-to-Back Fulfillment. Identify an option that needs to be set for oracle Fusion Planning Central to plan back-to-back item components and resources.

A. Select the Used in Planning check box in the new Work Definition.

B. Select the Used in Planning check box in the Work Definition Names.

C. Select the Used in Planning check box in the Work Structure.

D. Select the Used in Planning check box in the item definition.

Your customer runs two daily shifts in her plant: Morning Shift and Evening Shift. A resource LATHE is assigned to the work center W1. There are five units of LATHE available, of which three units are available for the Morning Shift and the remaining units are available for the Evening Shits. Which two actions must you perform to associate LATHE with W1?

A. Do not select the Available 24 Hours check box and in the Resource Availability region, enter 3 against the resource LATHE in the Morning Shift column.

B. Select the Available 24 Hours check box and in the Resource Availability region, enter 3 against the resource LATHE in the Morning Shift column.

C. Select the Available 24 Hours check box and in the Resource Availability region, enter 2 against the resource LATHE in the Evening Shift column.

D. Do not select the Available 24 Hours check box and in the Resource Availability region, enter 2 against the resource LATHE in the Evening Shift column.

E. Do not select the Available 24 Hours check box and in the Resource Availability region, enter 60% against the resource LATHE in the Morning Shift column.

F. Do not select the Available 24 Hours check box and in the Resource Availability region, enter 40% against the resource LATHE in the Evening Shift column.

A user wants to transfer the work order status updates and resource transaction data for costed resources

to Cost Management.

Which scheduled process should you run to achieve this requirement?

A. Transfer Cost to Cost Management

B. Transfer Transactions to Costing

C. Transfer Ledger Balances

D. Transfer General Ledger Balances to Balance Cubes

A Manufacturing Engineer in a plant is creating an alternative manufacturing process for an item using its existing Work Definitions. After copying from the existing Work Definition WD1 to the alternative Work Definition WD2, the engineer finds that the operation items were not copied in the alternative manufacturing process WD2. Identify the reason.

A. The Production Priority was not populated in the new Work Definition WD2 during creation.

B. The Item and Structure Name in the existing Work Definition WD1 were retained in the new Work Definition WD2 as well during creation.

C. The Item and Structure Name were changed in the new Work Definition WD2 during creation.

D. The Start Data was not populated in the new Work Definition WD2 during creation.

Identify three types of Item Quantities displayed in the Work Order History tab.

A. Scrapped Quantity

B. In Process Quantity

C. Remaining Quantity

D. Total Quantity

E. Completed Quantity

The Plant Manager informs you that they have bought several machines for their manufacturing plant ABC. The plant has been set up with a separate cost element set ABC in Manufacturing Cloud. You are requested to configure these machines in such a way that those are costed to the work order for which operations are performed on these machines. Identify the correct setup that you will advise to the Plant Manager.

A. Set up the machines as cost element type of "Resource" by selecting Cost Element set ABC.

B. Set up the machines as cost element type of "Overhead" by selecting Cost Element set ABC.

C. Set up the machines as cost element type of "Overhead" by selecting Cost Element set Common.

D. Set up the machines as cost element type of "Resource" by selecting Cost Element set Common.

You are in the process of defining a Standard Operation for visual inspection. You want the completion of this standard operation to be reported in all work orders that reference it. Identify the setup that will fulfill this requirement.

A. Select the Automatically Transact check box while defining the Standard Operation.

B. Deselect the Count Point check box while defining the Standard Operation.

C. Select the Count Point check box while defining the Standard Operation.

D. Ensure that the Charge Type of the resource is Automatic.

During a Manufacturing Cloud implementation, the Production Supervisor wants to close the work orders for last month and wants to make sure that the work orders include the correct cost. Identify the approach to be taken by the Production Supervisor.

A. The Production Supervisor need not include cost variances while costing last month's work orders because those can be applied directly in subledger accounting.

B. The Production Supervisor needs to include all costs and variances in last month's work orders and close them; however, the work orders where updates are expected, should not be closed.

C. The Production Supervisor should make sure that all costs are included while closing last month's work orders; however, variances can be included after closing the work orders.

D. Work order costs can be updated anytime regardless of the status of the work order.

The production user wants to report Work Order completion. Identify two ways of reporting the progress of work order at work order operation level.

A. Change Move status to Ready.

B. Complete using quantity completion

C. Complete with Details

D. Quick Complete

E. Change status of Operation to completed