NS0-515 Online Practice Questions and Answers

Click the Exhibit button.

Referring to the exhibit, which cable is an InfiniBand 4X connector?

A. 3

B. 1

C. 2

D. 4

What are two base host connectivity selections that are provided by the E2800 controller? (Choose two.)

A. FC

B. SAS

C. IB

D. iSCSI

Which two errors would fail a pre-upgrade health check? (Choose two.)

A. Hot spares are in use

B. Volumes are reported on a non-preferred path

C. An excess number of event log events are present

D. I/O is being processed

Where would you find the version of the driver and firmware for QLogic HBAs that are supported by NetApp E-Series systems?

A. Interoperability Matrix Tool

B. SANtricity Admin Guide

C. Hardware Universe

D. QLogic download webpage

An E2812 system, without expansion shelves, is configured with 12 Gb SAS host interface cards (HICs) and is directly connected to a host. However, the host cannot access the volumes.

In this scenario, which two troubleshooting steps should you take? (Choose two.)

A. Verify that the host can ping the E2812 system over the SAS link

B. Verify that the E2812 host port SAS link up lights are illuminated

C. Verify that the E2812 SAS CHAP secret is set D. Verify that the correct SAS ports are in use on the E2812 system

You want to find detailed information about the devices that are connected to the Brocade switch. In this scenario, which command would accomplish this goal?

A. portloginshow

B. zoneshow

C. nsshow

D. switchshow

Which three documents should be provided to the customer after the E-Series installation is complete? (Choose three.)

A. a document showing how much space is available for system expansion

B. a document showing the cabinet layout with cabling information and IP addresses being used

C. a document showing user IDs and passwords for all deployed devices

D. a document with IMT pages that show the supported host configuration and fabric switches in the solution

E. a document showing available power on the UPS with no equipment connected

The NetApp E-Series system with a 32 Gb FC Host Interface Card (HIC) requires which type of fiber cable to connect to switches or to connect directly to hosts extending up to 100 meters?

A. OM4

B. OM3

C. OM1

D. OM2

Which iSCSI setting would you change from its default value to increase the throughput of an iSCSI host port on a NetApp E-Series system?

A. maximum transmission unit (MTU)

B. flow control

C. Challenge-Handshake Authentication Protocol (CHAP)

D. Time to Live (TTL)

Your AutoSupport does not automatically send reports to NetApp's ActiveIQ tool.

In this scenario, how do you access the data that would have been sent using the AutoSupport feature?

A. Use SANtricity Unified Manager to collect the support data remotely

B. Access the event log by using SANtricity System Manager

C. Use SANtricity System Manager to manually collect the support data

D. Ask NetApp Support to help you to access the data by using special support tools

An administrator is asked to migrate two DE6600 shelves into a newly deployed E5760 environment that is configured with a stack of two DE460C shelves.

In this scenario, how does the administrator complete this task?

A. Cable the DE6600s at the beginning of the stack

B. Cable the DE6600s into a separate stack

C. Cable the DE6600s at the end of the stack

D. Cable the DE6600s between the DE460C shelves

When working on a customer's E-Series system to configure LDAP, you realize that you need to complete a Certificate Signing Request to receive a certificate.

In this scenario, when entering the information for the CSR, what information do you need from the controllers themselves? (Choose three.)

A. the controller's alternate IP addresses

B. the controller's serial number

C. the controller's geographical location

D. the controller's common name

E. the controller's alternate names

A junior administrator recently made changes to an E-Series system. As a result of these changes, the management host lost the ability to manage the E-Series system through in-band management, but the host still has access to the E- Series data volumes.

In this scenario, what caused this issue?

A. The access volume was un-mapped

B. The management IPs were changed

C. The ownership of the management host's volumes changed

D. Auto Load Balancing was disabled

A customer is running several EF570 systems and uses the ability of the EF-Series systems to run two host protocols at the same time. You are installing a new EF570 that uses the NVMe protocol for a high performance computing application. The controller on-board ports will not connect, but the HIC ports are working fine.

In this scenario, what is the problem?

A. The on-board host ports are disabled

B. There is a cable fault preventing the on-board ports from connecting

C. The on-board ports have the wrong SFPs for the desired network protocol

D. The switch ports are shut-down

A customer wants to manage an E-Series system over a secure connection between the system and a server. During implementation, you are asked to fulfill this installation requirement.

In this scenario, which three actions are required to complete this task? (Choose three.)

A. Disable the legacy management interface on the system

B. Disable all the system's local user roles except admin

C. Import certificate authority signed certificates into the system

D. Import the system's self-signed certificates into the system

E. Complete the certificate signing request on the system