HPE6-A44 Online Practice Questions and Answers

An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.274.426. The administrator accesses an AP associated with this cluster, reboots it and accesses apboot mode. The administrator executes the printenv command. Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?

A. Nodelist

B. Servername

C. Master_ip

D. Cfg_lms

Which Aruba Unified Communications and Collaboration (UCC) deployment mode should be used when UCC is disabled on the Mobility Controllers (MCs)?

A. Heuristics mode

B. WMM mode

C. ALG mode

D. SDN-API mode

An administrator uses a ClearPass server to perform user authentication and download the role configuration that should be applied to the user's session. The server is associated to an AAA profile of a VAP. However, when a user connects to the SSID of the VAP, they are assigned the default role.

What must the administrator do to ensure that the role is downloaded and used?

A. Enable download role for CPPM in the VAP's WLAN profile.

B. Enable server derivation in the ClearPass' RADIUS configuration.

C. Enable server derivation in the server group.

D. Enable server derivation in the AAA Server Group.

Which ArubaOS CLI command can an administrator execute to determine if AP load balancing is enabled in a cluster?

A. show aaa cluster essid

B. show lc-cluster group-membership

C. show switches

D. show ap active

An administrator needs to apply a patch to an Aruba environment to implement improvements for AirMatch. What is the Aruba recommended approach for this process without a reboot?

A. Upgrade the AirMatch Loadable Service Module (LSM) on each Mobility Controller.

B. Upgrade the AirMatch Loadable Service Module (LSM) on the Mobility Master.

C. Upgrade the ArubaOS by the use of Live Upgrades (in-service upgrades).

D. Create controller partitions to minimize downtime.

Which configuration command enables an Aruba Mobility Controller (MC) to send AMON messages to an AirWave System?

A. auth-server

B. snmp-server

C. mgmt-server D. tunneled-node-server

An administrator wants to use AirWave to manually add devices on the network. Where should the administrator perform this action?

A. in AMP Setup

B. in APs/Devices

C. in Groups

D. in Device Setup

An administrator configures Unified Communications and Collaboration (UCC) heuristics mode on an Aruba Mobility Master (MM). What should be modified in order to send items such as VoIP sessions and monitored information about adds, updates, deletions, and periodic snapshots of those VoIP sessions on the MM or the Aruba Mobility Controller (MC)?

A. OpenFlow Controller profile

B. Mgmt Config profile

C. Skype ALG Configuration profile

D. OpenFlow profile

An administrator implements machine authentication in an 802.1X profile. Which user role will be assigned to the user's session if machine authentication passes, but the 802.1X user authentication fails for a user who connects?

A. 802.1X default user role

B. Machine authentication default machine role

C. 802.1X initial user role

D. Machine authentication default user role

An administrator wants to determine if an IPSec session is established. In order to tunnel and protect the GRE data traffic between a RAP and an Aruba Mobility Controller (MC). Which MC command provides this information?

A. show rap-wml

B. show tunneled-node

C. show crypto ipsec sa

D. show crypto isakmp sa

An administrator supports a RAP to a branch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it.

Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?

A. Standard

B. Persistent

C. Always

D. Backup

Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?

A. PAPI

B. SNMP

C. VRRP

D. IPSec

An administrator enables AP load balancing for a cluster of Mobility Controllers (MCs). APs connected to the cluster have an LMS IP address configured in their AP Group configuration. No other parameters are changed in the cluster.

If the two load AP thresholds are reached, what occurs?

A. The APs are rebalanced across the cluster.

B. The APs always stay connected to the LMS IP address configured in the AP Group profile.

C. The users are rebalanced across the cluster.

D. The users and APs are rebalanced across the cluster.

An AP connects to a controller. Then, the AP loses power and reboots.

Which parameters will the AP remember and use from its initial connection? (Select two.)

A. AP group

B. Server IP

C. AP IP address and subnet mask

D. Mobility Master IP

E. AirWave server name

IEEE 802.11r relies on which technology to reduce re-authentication delays when clients roam between APs?

A. Fast BSS Transition

B. Temporal Key Integrity

C. Robust Security Network

D. Opportunistic Key Caching