HPE0-S55 Online Practice Questions and Answers

One of the DL380 Gen 10 servers in your infrastructure has failed to boot after a 3rd party PCIe NIC Was installed.

A. HPE does not allow 3rd party PCle cards.

B. the latest support pack proLiant must be used before accessing any additional 3rd party product in the server.

C. The manufacture did not digitally sing the correct firmware amd HPE secure Boot halted the process.

D. The ILO interface did not have a current IP provided from DHCP.

A customer needs a new high frequency trading cluster. Their current cluster has non-deterministic performance and undesirable latency. Because high frequency trades are extremely time sensitive transactions, the customer cannot tolerate the microseconds of delay that can randomly occur on current

cluster.

Which ILO 5 Gen 10 feature can you purpose to address this technical requirement?

A. Turbo Cores

B. Jitter Smooting

C. Persistent Memory

D. NVMe drives

A customer considering installing a synergy frame in an existing rack where c7000 chassis is currently installed.

Which question should you ask to ensure the new frame will be supported in the rack?

A. Are there any third party server installed?

B. How deep is existing rack?

C. is there a UPS installed in the rack?

D. How wide is the existing rack?

Match each Synergy component with the description of the functionality it provides.

A. Answer:

A customer purchased proLiant Gen 10 servers. The customer is transitioning from a physical to a virtual environment. Which feature should be enabled to ensure that they get the optimal performance from their new servers?

A. UEFI optimized boot

B. integration with an HPE OneView for VMware vCenter

C. performance optimized using the workload profiles

D. OneView OS Build plan

A customer is expanding their blade based infrastructure managed by HPE OneView with an HPE synergy platform. The customer is familiar with HPE Oneview and wants to Know if the same management procedure can be used manage HPE synergy platform.

A. HPE synergy can be managed using the same HPE OneView instance that is used to manage HPE BladeSystem platform.

B. HPE Synergy can be managed using HPE OneView as long as a separate, dedicated HPE OneView is deployed for HPE Synergy management.

C. HPE Synergy can be managed by HPE, Which is running an encoded version of HPE OneView.

D. HPE Synergy Must Be With HPE Synergy Insight Manager.

Your customer is interested in Synergy and composable infrastructure. They are concern that operational savings may not meet expectation since operation system installation consumes a great deal of time.

A. The Synergy Composer provides HTTPS boot services.

B. The Synergy Composer Link modules provides PIX operation boot partition.

C. The Synergy composer can provision operating systems in seconds.

D. The synergy image streamer can provision operating system in seconds.

A customer wants to implement a large Microsoft Storage Spaces Direct environment. Which produced should the customer use?

A. VXLAN

B. RDMA

C. OSOPF

D. NVGRE

A customer is using HPE smart Update Manager (SUM) for firmware update. They plan 100 gen ProLiant servers, and they are concerned about whether HPE SUM will be able to support this size of installation.

A. ILO Advanced premium security edition

B. Insight control server provisioning

C. Insight Cluster Management Utility

D. ILO Amplifier pack

You need to demonstrate the runtime firmware verification scan functionality on a proLiant DL380 Den 10 server. You find that the option is not available in the UEFI interface.

A. The server boot I set UEFI.

B. The Onboard Administrator has been initialized.

C. The file firmware-O05-1-10.1.1.x86_64rpm is the incorrect version.

D. The required ILO license has been installed

While installing a three frame Synergy solution, only two of the frames are identified during the discovery

process.

What should you do to get resolution?

A. Remove and re-insert the standby Composer.

B. Issue a refresh command to the enclosure.

C. Open the front panel Composer, and read the error message.

D. Validate Frame link Module topology.

A customer needs a VDI solution. The amount of computer per U OF rack space will be key point in their

final solution selection.

Which HPE product would be an ideal solution as part of your RFP response?

A. HPE Apollo 4510 gen10

B. HPE Apollo 4200 Gen9

C. HPE SY480 Gen 10

D. HPE DL580 Gen10

What is a benefit NVMe technology?

A. optimized SMB workloads

B. minimized network bandwidth

C. low application costs

D. low latency data access

Your customer is building out their object-based storage solution. They initially developed object store

using DL380 Gen 9 servers but are now looking for a solution that is purpose built to provide the additional

storage.

What solution should you recommend?

A. DL580 Gen10

B. Apollo 4510 Gen 10

C. ML350 Gen 10

D. DL560 Gen10

A customer has 10 HPE BladeSystem enclosures managed by HPE OneView. They want to add three

HPE Synergy frames.

What is a proper procedure to manage a new HPE Synergy installation?

A. Use HPE Composer for HPE Synergy frames management.

B. Deploy HPE Global Dashboard for HPE synergy management.

C. Add all frames to the existing HPE Oneview appliance.

D. Deploy a dedicated HPE OneView appliance for HPE Synergy frames