A customer recently purchased an HPE Moonshot chassis to host its internal website. Subsequently, the customer reports difficulties deploying new cartridges in an efficient manner. The customer suggests exchanging the solution for a more traditional server platform.
What can the architect demonstrate to the customer to help solve the problem while preserving the validity of the original design solution?
A. how to use SCCM to provide a graphical installation method for new nodes
B. how to use VSP to provide a graphical installation method for new nodes
C. how to add an mRCA module to provide a graphical installation method for new nodes
D. how to use iLO remote console to provide a graphical installation method for new nodes
A customer is planning a multi-threaded HPC solution that would benefit from threads running in parallel.
The architect selects the HPE Apollo 6000 and needs to choose between the HPE XL230a and the XL250a compute tray.
What is one reason for choosing the XL250a tray?
A. The HPE XL250a server supports DDR4 HPE Smart Memory.
B. The HPE XL250a server supports dual accelerators.
C. The HPE XL250a server provides full length PCIe expansion slots.
D. The HPE XL250a server delivers dual processor performance.
A customer requests a proposal for an HPE Apollo 4530 system. The customer reports that it has experienced problems in the past with boot time malware attacks within its environment. Which solution should the architect propose to protect the customer from this threat?
A. Use encrypted drives.
B. Use Smart Array Controllers.
C. Enable Legacy BIOS mode.
D. Enable UEFI secure boot mode.
An architect is choosing between 1GbE and 10GbE connectivity for an object storage solution. What is a valid reason to select 10GbE?
A. The customer's network infrastructure is based on QoS service.
B. The customer needs the system to recover quickly from a failure.
C. The customer needs the object storage servers to be able to locate random data on a disk more quickly.
D. The customer plans to increase the memory in the nodes in the future.
An architect is designing an HPE Apollo 6000 solution to support a customer application. The architect is choosing between the HPE ProLiant XL230a and the XL250a compute tray. What is one reason for choosing the XL250a tray?
A. The application is single-threaded.
B. The application requires high storage capacity.
C. The application uses high amounts of memory.
D. The application requires GPU acceleration.
An architect is writing a response to a Request for Proposal (RFP). The customer has requested financial information on the monetary amount by which assets are valued in business records. Which value does the architect need to consider?
A. total cost of acquisition (TCA)
B. net investment value (NIV)
C. net book value (NBV)
D. fair market value (FMV)
A customer has an HPE Integrity Superdome X solution. The customer requires flexible nPartitions that IT staff can quickly build at different times based on a pre-defined template.
Which approach should the architect recommend the customer take to meet this requirement?
A. Create nPartition configs using the iLO GUI for the HPE Integrity Superdome X blades.
B. Create nPartition build plans in HPE Insight Control server provisioning (ICsp).
C. Create server templates in HPE OneView 2.0.
D. Create ParSpecs in the HPE Superdome Onboard Administrator (SD OA).
HPE Moonshot 180G Switch Modules and HPE Moonshot 16-SFP+ Uplink ModulesA customer is planning to replace its DAS-based third-party server solution with an HPE BladeSystem solution using FlexFabric connected to an iSCSI based HPE StoreVirtual 3200.
Which method should the architect recommend for migrating data from the old system to the new system?
A. Use Peer Motion with a temporary 180-day license
B. Use Business Copy software licensed to the current total size of all DAS storage
C. Use Virtual Copy software
D. Use a LAN-based file transfer method
A proposed solution includes the HPE Moonshot-4QSFP+ Uplink Modules. The customer informs the architect that the planned purchase of 40GbE switches has been postponed. The customer still intends to purchase 40GbE switches within a year, but in the meantime, existing 10GbE switches will be used. These switches are HPE network switches located 25 meters from the location of the racks that house the HPE Moonshot Solution. The customer needs 30Gb/s bandwidth.
Which action should the architect recommend to allow the customer to deploy the solution immediately and easily take advantage of 40GbE when deployed later?
A. Swap in HPE Moonshot-16SFP+ Uplink Modules
B. Replace the QSFP+ transceivers with SFP+ transceivers
C. Add QSP+/SFP+ adaptor kits to the design
D. Replace the DAC cables with DAC splitter cables
A customer is working on a project to enable workplace productivity. The customer needs a solution that will allow employees to connect to their workplace environment by using a personal mobile phone, tablet, laptop, or desktop computer. Employees must be able to stop and resume work seamlessly while travelling between offices.
Which purpose-built hardware can the customer use to help achieve this goal?
A. HPE Moonshot to provide hosted physical desktop and application virtualization t mobile users
B. HPE Apollo 2000 to provide VDI access to mobile users
C. HPE Moonshot to provide VDI access to mobile users
D. HPE Apollo 2000 to provide hosted physical desktop and application virtualization to mobile users
A customer needs a server quote for a DL Gen9 server. The requirements are as follows:
-Gen9 technology with internal storage to support 12 drives
-Exchange database capacity of at least 1.2TB
-512GB of LRDIMM memory
-
10Gbe Ethernet support
The architect is proposing the DL380 Gen9 server to meet this customer's current needs and some near future expansion.
Which component should the architect add to the quote to meet the customer's requirements?
A.
HPE 12Gb SAS Expander Card
B.
HPE SAS HBA Controller H244br
C.
HPE PCIe Workload Accelerators
D.
HPE Smart Storage Battery
An architect is discussing advantages of the Software Defined Datacenter concept used by HPE OneView with a customer. The customer is focused on improving the data center agility and manageability. Which key benefit of the SDDC should the architect discuss with customer?
A. improved IRR and NPV results for the customer
B. offers a virtual machine self-service solution
C. various elements of the infrastructure are virtualized and delivered as a service
D. results in significant power and cooling expense reduction
An architect proposes an HPE Apollo solution for a customer's environment. The customer needs the ability to have each of the network adapters in the HPE Apollo server connect to separate switches while also allowing them to be bonded for load-balancing.
Which networking feature on the switches will meet the customer's need?
A. Virtual Extensible LAN (VXLAN)
B. Intelligent Resilient Framework (IRF)
C. Network Virtualization using Generic Routing Encapsulation (NVGRE)
D. Transparent Interconnection of Lots of Links (TRILL)
An architect is planning an HPE Integrity Superdome X solution. One nPartition will include two HPE BL920s Gen9 blades. After discussions and testing, the architect determines that the nPartition requires more memory than initially planned. Which approach should the architect recommend to the customer to ensure optimum performance?
A. Provision each blade in the nPartition with the same amount of memory
B. Add DIMMs in multiples of 12 even if this means adding more capacity than necessary
C. Favor using lower capacity DIMMs to fill more memory slots on each channel
D. Avoid using all memory channels on a processor
An architect is positioning a scale-up solution to a customer. The solution will reduce the customer's server sprawl by reducing 100 legacy virtualization hosts while improving performance. Which HPE platform provides an appropriate solution?
A. HPE Integrity Superdome X
B. HPE Apollo Systems
C. HPE Synergy
D. HPE Hyper-converged systems