Certbus > Hitachi > Hitachi Certifications > HCE-5420 > HCE-5420 Online Practice Questions and Answers

HCE-5420 Online Practice Questions and Answers

Questions 4

You have performed an upgrade on a customer's HCP. You complete the upgrade and verify that all the nodes are online and then give the system back to the customer. A few minutes later, the customer complains that they can read existing content but they cannot create new content on the HCP. Which step was missed?

A. The install user password was changed.

B. The upgrade was not committed.

C. The rollback was not performed.

D. The system management console is disabled.

Browse 120 Q&As
Questions 5

How should the RAID group(s) and logical volume(s) be configured on a HCP 300 node?

A. three RAID groups each with three logical volumes

B. three RAID groups each with a single logical volume

C. a single RAID group with a single logical volume

D. a single RAID group with three logical volumes

Browse 120 Q&As
Questions 6

Which three tenant management console permissions does the security role have on a HCP? (Choose three.)

A. View namespace access protocol configurations.

B. View tenant log messages about security events.

C. View tenant overview.

D. Monitor replication.

E. Modify tenant management console security settings (HCP tenants only).

Browse 120 Q&As
Questions 7

You customer wants to collect statistics about each namespace using the tenant management console. Which two types of chargeback reports can be created? (Choose two.)

A. hourly report

B. monthly report

C. daily report

D. weekly report

Browse 120 Q&As
Questions 8

Which username/password pair do you use to log into the HCP System Management Console for the first time?

A. admin/hds

B. security/Chang3Me!

C. hcpadmin/hcpadmin

D. root/hitachll

Browse 120 Q&As
Questions 9

A customer asks you to deploy a HCP. They want to have three HCP tenants for three Active Directory organization units and two HCP tenants for two UNIX groups. They plan to use Active Directory authentication for CIFS users and UNIX authentication for NFS users. What do you tell the customer?

A. You can configure CIFS and NFS in accordance to the plan.

B. CIFS and NFS cannot be configured for tenants.

C. You can configure for either CIFS or NFS, but not both.

D. RADIUS servers are required before you can configure CIFS and NFS in accordance to the plan.

Browse 120 Q&As
Questions 10

A customer recently acquired a HCP 500. They want to setup switch zoning in this format: HCP1_R1_U10_B_85042771_1B as recommended by HDS. Which two switch zoning naming conventions apply? (Choose two.)

A. 18 - port

B. 18 - node

C. 85042771- serial number

D. 85042771 - product key

Browse 120 Q&As
Questions 11

A HCP search node has been installed at a customer's site. A tenant with the name divisionb exists on the HCP system named hcp.companya.com. What is the proper URL that would be used to access the search console for this tenant?

A. https://divisionb.hcp.companya.com :8888

B. http://divisionb.hcp.companya.com :8888

C. https://divisionb.hcp.companya.com :8080

D. http://divisionb.hcp.companya.com :8080

Browse 120 Q&As
Questions 12

A customer is purchasing a HCP configuration to support 400,000,000 objects. Search is not required. What is the minimum required configuration for this customer?

A. HCP 300 with 4 storage nodes

B. HCP 500 with 1 storage node

C. HCP 300 with 40 storage nodes

D. HCP 500 with 10 storage nodes

Browse 120 Q&As
Questions 13

A customer would like to install HCP platforms at several remote sites and replicate them back to a central

location.

What should be considered when designing the solution?

A. HCP can support five inbound and one outbound link for replication.

B. HCP can support ten inbound and two outbound links for replication.

C. HCP has no limit on the number of inbound links set up for replication.

D. HCP only supports one inbound and one outbound bi-direction replication.

Browse 120 Q&As
Questions 14

A 4-Node HCP with 40 users is being managed using the single administrator function. Two new

users, each from a different department, need to access data in two HCP tenants named: Financials Payable and Financials Receivable. Which action should the administrator perform to make this happen?

A. Create two new user accounts with security permissions.

B. Create default accounts named Financials Payable and Financials Receivable for each user.

C. Create a data access account for each user.

D. Create two system administration accounts.

Browse 120 Q&As
Questions 15

A customer's OS environment consists of 80% Windows and 20% UNIX. The customer has recently purchased a HCP solution and wants to restrict access to Windows systems in the 10.1.1.X IP range. What must be configured for the customer to start using the HCP with the Windows and UNIX clients?

A. Enable both the NFS and CIFS protocols then add 10.1.1.0/0 to the CIFS allow list.

B. Enable the NFS protocol and then add 10.1.1.0/0 to the CIFS allow list.

C. Enable both the NFS and CIFS protocols then add 10.1.1.0/0 to the CIFS deny list.

D. Enable the CIFS protocol and then add 10.1.1.0/0 to the CIFS deny list.

Browse 120 Q&As
Questions 16

Which OS LUN size do all HCP 300 configurations use?

A. 20 GB

B. 30 GB

C. 50 GB

D. 400 GB

Browse 120 Q&As
Questions 17

With which number must the multicast IP address begin?

A. 10

B. 192

C. 236

D. 238

Browse 120 Q&As
Questions 18

In which two instances would the MEGARaid utility be used? (Choose two.)

A. when replacing multiple failed disks in a HCP 500 node

B. when replacing multiple failed disks in a HCP 300 node

C. when replacing an entire node in a HCP 300 in which the RAID group is not healthy

D. when replacing an entire node in a HCP 500 in which the RAID group is not healthy

Browse 120 Q&As
Exam Code: HCE-5420
Exam Name: Hitachi Vantara Certified Specialist - Content Platform Implementation
Last Update: Mar 17, 2025
Questions: 120 Q&As

PDF

$49.99

VCE

$55.99

PDF + VCE

$65.99