A customer wants to expand their Dell EMC Unity Hybrid system, which includes a pool of 64 drives in a RAID 5 (4+1) configuration. What is the minimum number of drives needed to expand the pool?
A. 1
B. 5
C. 6
D. 7
A customer requests a proposal for a new Dell EMC SC Series storage system with the following specifications:
1.
IO type: Random
2.
Existing data: 100 TB
3.
Rate of change: 2 TB per day
4.
Growth rate: 100 GB per day
5.
Snapshot retention: 1 week
What storage capacity should be specified to scope the system with Tier 1 RAID 10 protection?
A. 2.5 TB
B. 4.5 TB
C. 6.5 TB
D. 8.5 TB
A Dell PowerStore protection policy contains two snapshot rules and one replication rule Which storage resources will run only the snapshot rules?
A. Virtual Machines and File Servers
B. Volumes and Volume Groups
C. Virtual Machines and File Systems
D. Volume Groups and File Systems
A customer is managing a Dell EMC SC7020 array running SCOS 7.2. The array is running out of capacity. The customer asks you to begin scoping the system for additional drives. What disk drive redundancy rule applies to 3.84 TB SSDs?
A. Forced Dual Redundancy
B. Default Dual Redundancy
C. Default Single Redundancy
D. Forced Non-Redundancy
A database volume on a Dell PowerStore cluster has a Protection Policy that is applied with a single snapshot rule The policy takes a snapshot every hour and retains them for 48 hours The storage administrator must present a copy of the database volume to a test environment
Which action does the storage administrator take to meet this requirement?
A. Restore the snapshot to a new test volume
B. Create a thin clone of the database volume and map it to the test host
C. Create a new snapshot policy for the test volume
D. Create a snapshot of the database volume and map it to the test host
What is the maximum number of SAS buses per SP for a Dell Unity XT 480F without an additional SAS I/O module1?
A. 4
B. 3
C. 1
D. 2
You are sizing a new Dell EMC SC Series array. Upon analyzing the Live Optics report, you find the current system has a peak throughput of 4687 MB. What is the minimum number of 10Gb iSCSI front-end ports required to meet the throughput needs?
A. 8
B. 10
C. 12
D. 16
You are upgrading a Dell EMC Unity array to a Dell EMC PowerStore 1000 T array. The customer asks what they need to do so they can map PowerStore snapshots from the new PowerStore array to a host. What should be your response?
A. Create a volume group of the snapshot.
B. Create a read/write snapshot of the snapshot
C. Create a copy of the snapshot
D. Create a thin clone of the snapshot
What final operation should be performed after adding a single drive to a Dell Powerstore array?
A. Add it to an existing DRS
B. Format the drive
C. Back up the Keystore
D. Verify drive operation
What is a consequence of using an 800 GB drive and five 400 GB drives in a Dell EMC Unity XT dynamic pool?
A. Extents 9 -14 are used to create a RAID Group
B. Unisphere short strokes the 800 GB drive to 8 extents
C. Extents 9 -14 are marked unavailable until more 800 GB drives are added
D. Extents 9 -14 are marked unavailable and can never be recovered
Which features were introduced in SCOS 7.3?
A. Distributed Sparing and Live Volume ALUA
B. Data-in-Place upgrade for SC4020 and 4K HDD support
C. Unisphere for SC and Live Volume Auto-failover
D. CloudlQ support and Cross Platform Replication
What is a characteristic of tenant traffic on a Dell EMC Unity array?
A. Separated by the associated VLANs at the Linux Kernel layer
B. Separated by the associated subnet providing data separation with increasing security at the network layer
C. Separated by one associated VLAN providing data separation with increasing security at the Linux Kernel layer
D. Separated by the associated subnet at the Linux Kernel layer
Which methods are available to migrate storage resources from one Dell PowerStore appliance to another within the same cluster?
A. Assisted Migration and Live Migrate
B. Migrate and Assisted Migration
C. Assisted Migration and Volume Motion
D. Volume Motion and Live Migrate
When enabling a multi-protocol NAS implementation on a Dell EMC PowerStore array, what is required for an end-to-end mapping of a UNIX system?
A. Security ID (SID) and Active Directory (AD)
B. User ID (UID) and Group ID (GID)
C. Group ID (GID) and Active Directory (AD)
D. Security ID (SID) and User ID (UID)
What are the two biggest factors that determine IOPS when using SSDs in a Dell EMC SC Series array?
A. Current latency and queue depth
B. Application block size and overall throughput
C. Multi-tenant arrays and tier configuration
D. Read/write percentage and peak workload