CWAP-404 Online Practice Questions and Answers

Correct Answer: D

Explanation: The channel number is not transmitted in an HT PPDU header. An HT PPDU header is a part of the PPDU that contains information such as modulation, coding, data rate, and number of spatial streams for an 802.11n transmission. The channel number is not included in the HT PPDU header, as it is determined by the frequency band and channel width that are used by the transmitter and receiver. The channel number can be inferred from the frequency band and channel width, which are indicated by bits in different fields of the HT PPDU header, such as HT-SIG and HT-LTF. The other options are not correct, as they are transmitted in an HT PPDU header. The number of spatial streams, PPDU length, and MCS index are indicated by bits in the HT-SIG field of the HT PPDU header. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 4:

802.11 Physical Layer, page 108-109

Correct Answer: A

Explanation: An 802.11 wireless adaptor is required for Wi-Fi integration in laptop-based spectrum analyzer software in addition to the spectrum analysis adapter. The spectrum analysis adapter is a hardware device that captures the RF signals in the wireless environment and sends them to the spectrum analyzer software for analysis and display. The 802.11 wireless adapter is a hardware device that connects the laptop to the wireless network and allows the spectrum analyzer software to correlate the RF data with the Wi-Fi data, such as SSID, channel, and BSSID. This enables the spectrum analyzer software to provide more context and insight into the spectrum activity and its impact on the Wi-Fi network. A firmware upgrade for the spectrum analysis adapter is not required for Wi-Fi integration, but it may be needed to fix bugs or add features to the device. A directional antenna is an antenna that focuses the RF energy in a specific direction and has a high gain and a narrow beamwidth. A directional antenna can be used with a spectrum analysis adapter to pinpoint the location or source of interference or noise in the wireless environment, but it is not required for Wi-Fi integration. SNMP read credentials to the WLAN controller or APs are not required for Wi-Fi integration, but they may be useful for obtaining additional information about the wireless network configuration and performance from the network devices.References: CWAP-404 Study Guide, Chapter 4: Spectrum Analysis and Troubleshooting, page 123 CWAP-404 Objectives, Section 4.2: Integrate Wi-Fi data with spectrum analysis data CWAP-404 Study Guide, Chapter 4: Spectrum Analysis and Troubleshooting, page 131

Correct Answer: C

Explanation: The data rate at which the PHY preamble was transmitted is 6 Mbps. The PHY preamble is a part of the PPDU that is transmitted before the PHY header and the PSDU. The PHY preamble consists of a series of training fields that help the receiver to detect and synchronize with the signal. The PHY preamble is always transmitted at a fixed data rate that depends on the type of PPDU (e.g., OFDM, HT, VHT, HE). For an 802.1 lac data frame on channel 52, which uses VHT PPDUs, the data rate for the PHY preamble is 6 Mbps. This data rate does not depend on MCS (Modulation and Coding Scheme), which only affects the data rate for the PSDU. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 4: 802.11 Physical Layer, page 99-100

Correct Answer: D

Explanation: Delta is the timing column in the packet view that measures the time difference between two consecutive packets in a capture file. Delta can be used to measure the roaming time from the last VoIP packet sent on the old AP's channel to the first VoIP packet sent on the new AP's channel by selecting these two packets and looking at their delta values. The other timing columns are not suitable for this measurement because they do not show the time difference between two specific packets. Roaming is a column that shows whether a packet belongs to a roaming event or not. Relative is a column that shows the time elapsed since the beginning of the capture file. Absolute is a column that shows the date and time when a packet was captured5 References: CWAP-404 Study Guide, Chapter 2: Protocol Analysis, page 57 CWAP-404 Objectives, Section 2.4: Analyze timing values

Correct Answer: D

Explanation: If the SSID element has a length of 0 in a Beacon frame decode, it means that the beacon is from a BSS configured to hide the SSID. The SSID element is a part of the Beacon frame that contains the name or identifier of the BSS. The SSID element has two fields: length and value. The length field indicates how many bytes are used for the value field, which contains the actual SSID string. If the length field is 0, it means that there is no value field or SSID string in the element. This is a common technique used by some APs to hide their SSID from passive scanning clients or potential attackers. However, this technique does not provide much security, as there are other ways to discover or reveal the hidden SSID, such as active scanning or capturing probe response or association frames. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5:

802.11 MAC Sublayer, page 122-123

Correct Answer: A

Explanation: All data frames will be retransmitted in this scenario. This is because the AP uses a Block Ack (BA) mechanism to acknowledge the receipt of multiple data frames from a client in a single frame. The BA contains a bitmap that indicates which data frames were received correctly and which were not. If the BA is not received by the AP due to frame corruption, the AP will assume that none of the data frames were received by the client and will retransmit all of them. The other options are not correct, as they do not account for the loss of the BA or the use of the bitmap. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 6: 802.11 Frame Exchanges, page 167-168

Correct Answer: C

Explanation: The function of 802.11 management frames is to manage the BSS. A BSS (Basic Service Set) is a group of STAs (stations) that share a common SSID (Service Set Identifier) and communicate with each other through an AP (access point) or directly in an ad hoc mode. Management frames are one of the three types of 802.11 frames, along with control and data frames. Management frames are used to establish, maintain, and terminate associations between STAs and APs, as well as to advertise and discover BSSs, exchange security information, report errors, and perform other management functions. The other options are not correct, as they are not functions of 802.11 management frames. Prioritizing network administration traffic, communicating configuration changes between WLAN controller and APs, and managing the flow of data are functions of other types of frames or protocols. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 120-121

Correct Answer: C

Explanation: The To DS and From DS flags should be set to 0 in an Association Response frame. An Association Response frame is a type of management frame that is transmitted by an AP to accept or reject an association request from a STA. The To DS (To Distribution System) and From DS (From Distribution System) flags are two bits in the Frame Control field of the MAC header that indicate whether a frame is destined for or originated from the DS (Distribution System), which is a system that connects multiple BSSs together. The To DS and From DS flags can have four possible combinations: 00, 01, 10, or 11. For an Association Response frame, which is sent from an AP to a STA within a BSS, both flags should be set to 0. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 121-122