Certbus > Riverbed > Riverbed Certifications > 830-01 > 830-01 Online Practice Questions and Answers

830-01 Online Practice Questions and Answers

Questions 4

What are the possible ways to downgrade a Virtual Steelhead appliance after it has been upgraded?

A. Remove the upgrade license and restart the virtual Steelhead appliance

B. Reinstall the original model license

C. Reduce the amount of CPU and RAM allocated to the Virtual Steelhead appliance and it will automatically downgrade at the next startup

D. It is not possible to downgrade after an upgrade

Browse 402 Q&As
Questions 5

After upgrading the Steelhead Mobile Controller to the latest software release, it requires a reboot. During the reboot, what would happen to the users connected to the Steelhead Mobile Controller via the Steelhead Mobile client?

A. All optimization ceases to function

B. Existing connections are reset, but subsequent connections will be optimized

C. The Steelhead Mobile client informs the user to reboot their computer

D. No disruption to the end user

E. Only Layer 7 optimization is affected; all other optimization remain unaffected

Browse 402 Q&As
Questions 6

What ports are required for proper operation of the Steelhead Mobile client?

A. 7800 outbound, 7801 inbound, 7870 outbound

B. 7800 inbound, 7870 inbound, 7870 outbound

C. 7800 inbound, 7801 outbound, 7870 outbound

D. None of the above

Browse 402 Q&As
Questions 7

For a new connection, a Load Balancing rule matches but none of the target Steelhead appliances in the rule are available. What will happen to the new connection?

A. The connection is passed through

B. The next rule in the list is examined

C. The Interceptor appliance triggers an alarm

D. The Interceptor appliance discontinues redirecting any new connections and places this rule in admissions control

Browse 402 Q&As
Questions 8

The Interceptor appliance cluster can support how many optimized connections?

A. 50,000

B. 100,000

C. 200,000

D. More than 200,000

Browse 402 Q&As
Questions 9

Under what circumstances would there be GRE traffic between the Interceptor and Steelhead appliances?

A. Throughout the entire lifespan of a connection

B. During connection teardown

C. During connection setup

D. GRE is not used but L2 is used during the entire connection

E. GRE is never used between the Interceptor and Steelhead appliances

Browse 402 Q&As
Questions 10

With these default registry parameters, SMB signing is negotiated in the following manner. (Select 2)

A. SMB/CIFS exchanges between the Client/Workstation and the Member Server are not signed

B. SMB/CIFS exchanges between the Client/Workstation and the Member Server are always signed

C. SMB/CIFS exchanges between the Client/Workstation and the Domain Controller are not signed

D. SMB/CIFS exchanges between the Client/Workstation and the Domain Controller are always signed

Browse 402 Q&As
Questions 11

Refer to the exhibit.

In the accompanying exhibit, SH3 and SH4 are able to optimize FTP and HTTP sessions between Client41 and the respective application hosts Server31 and Server32. However, optimization does not happen for Client42 and these application hosts. A quick check on SH3 and SH4 registers neither optimized nor pass-through traffic from Client42. Client42 is able to ping Client41 and the in-path address of SH4. Note that SH3 and SH4 are in auto-discovery mode. What is the likely cause?

A. The default gateway of Client41 is configured wrong

B. The default gateway of Client42 is configured wrong

C. The default gateway of SH3 is configured wrong

D. The default gateway of SH4 is configured wrong

E. The routing protocol between R3 and R4 is configured wrong

Browse 402 Q&As
Questions 12

WCCP uses bits to create and distribute buckets. Using HASH assignment, what are the maximum number of bits used?

A. 4

B. 7

C. 8

D. 32

E. 256

Browse 402 Q&As
Questions 13

When Connection Forwarding is in use, when a neighbor fails, the default behavior of the remaining neighbor will be to:

A. It will start to bypass traffic immediately

B. It will start to bypass traffic only after about 30 seconds

C. It is transparent to the outage and will continue to optimize as per normal

D. It will cease to optimize for about 30 seconds and start to optimize again

Browse 402 Q&As
Questions 14

In the exhibit, there is a resident firewall inside the WAN cloud that drops packets with any TCP option. The customer allows you to use fixed-target rules instead. The firewall policy can only allow unassigned ports 7750-7751 to pass-through it. Additionally, the SH3 has been configured with service port 7750, while SH4 has been configured with service port 7751. Which of the following fixed-target rule specification is correct?

A. The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7800. The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7800.

B. The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7810. The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7810.

C. The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7750. The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7750.

D. The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7751. The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7750.

E. The fixed-target rule at SH4 peers to the inpath0_0 IP address of SH3 as the target appliance with port number 7750. The fixed-target rule at SH3 peers to the inpath0_0 IP address of SH4 as the target appliance with port number 7751.

Browse 402 Q&As
Questions 15

-- Exhibit

-- Exhibit -Refer to the exhibit. The connections from USER1 to Server3 are not being optimized. What is the possible cause? (Select 2)

A. Optimization services are not running on the data center SH11.

B. It is a UDP connection.

C. The branch Steelhead appliance is down.

D. Services are not running on the branch Steelhead appliance.

Browse 402 Q&As
Questions 16

A SteelHead blocks all traffic when the appliance is powered off. What reasons could cause this behavior? (Choose two.)

A. This behavior is by design.

B. Router, switch and SteelHead interfaces have auto MDI/MDIX but incorrect cables have been used.

C. Fail-to-block is enabled.

D. The bypass NIC battery has failed.

E. Router, switch and SteelHead interfaces are hard coded and incorrect cables have been used.

Browse 402 Q&As
Questions 17

Which deployment options are available to Virtual SteelHead on ESXi?

A. Physical In-path (with Riverbed bypass NIC)

B. Virtual In-path

C. Out-of-path

D. Server-side Out-of-Path

E. All of the above

Browse 402 Q&As
Questions 18

The SteelHead Out of Band splice (OOB) uses which addressing mode? Assume a default configuration.

A. Always correct addressing.

B. Depends on which addressing mode the first optimized connection uses.

C. Always transparent addressing.

D. Always destination transparency.

Browse 402 Q&As
Exam Code: 830-01
Exam Name: RCPE Certified Professional WAN Optimization
Last Update: Mar 19, 2025
Questions: 402 Q&As

PDF

$49.99

VCE

$55.99

PDF + VCE

$65.99