350-601 Online Practice Questions and Answers

Port security is enabled on a Cisco MDS 9000 series Switch. Which statement is true?

A. Cisco Fabric Services must be disabled before enabling port security.

B. Port security can be enabled only globally and affects all VSANs.

C. Auto-learning is always enabled automatically when port security is enabled.

D. Any devices currently logged in must be added manually to the device databased.

Refer to the exhibit.

Which statement about the ERSPAN configuration in this environment is true?

A. Host A is the source of ERSPAN spanned traffic and host B is the traffic analyzer.

B. Host B is the source of ERSPAN spanned traffic and host A is the traffic analyzer.

C. The session number of the source of ERSPAN spanned traffic must have a session ID of 48 for the traffic analyzer to receive the traffic.

D. The session number of the source of ERSPAN spanned traffic must have a session ID of 47 for the traffic analyzer to receive the traffic.

Refer to the exhibit.

Which action is taken to ensure that the relay agent forwards the DHCP BOOTREQUEST packet to a DHCP server?

A. Configure the interface of the DHCP server as untrusted.

B. Configure the IP address of the DHCP server.

C. Enable the DHCP relay agent.

D. Verify the DHCP snooping bindings.

A network architect must redesign a data center network based on OSPFv2. The network must perform fast reconvergence between directly connected switches. Which two actions must be taken to meet the requirements? (Choose two.)

A. Set low OSPF hello and DEAD timers.

B. Configure all links on AREA 0.

C. Enable BFD for failure detection.

D. Use OSPF point-to-point links only.

E. Implement a virtual link between the switches.

A Cisco Nexus 9000 Series Switch experiences a startup configuration corruption. The engineer must implement a procedure to recover the backup configuration file from the switch. Which command set must be used?

A. 1. Clear the current configuration of the switch

2.

Restart the device

3.

Copy a previously saved configuration file to the running-configuration

4.

Copy the running-configuration to the startup configuration

B. 1. Clear the current configuration of the switch

2.

Restart the device

3.

Copy the running configuration to the startup configuration

4.

Copy a previously saved configuration file to the running configuration

C. 1. Copy the running-configuration to the startup configuration

2.

Clear the current configuration of the switch

3.

Restart the device

4.

Copy a previously saved configuration file to the running configuration

D. 1. Restart the device

2.

Copy the running-configuration file to a remote server

3.

Clear the current configuration of the switch

4.

Copy the running configuration to the startup configuration

A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature. Which component is upgraded during the infrastructure firmware upgrade stage?

A. Cisco IMC

B. Adapter

C. I/O module

D. BIOS

An engineer configures the properties of a cisco UCS cisco integrated Management controller network adapter for a standalone cisco C-Series server. The Fallback Timeout in the vNIC was set to 600. When the failure occurs. The secondary must be used and then fallback when the primary interface becomes available again.

Which action be taken to meet these requirements?

A. Set default VLAN on the adapters.

B. Increase Cos to 6.

C. Disable VNTAG mode.

D. Enable Uplink failover.

Refer to the exhibit.

What happens to the broadcast traffic when it reaches aggregation switches?

A. Agg-2 switch receives broadcast packets and stops forwarding to the peer link on Agg-1 switch.

B. Agg-1 switch prevents broadcast packets received on the vPC peer link from exiting the switch on ports Eth2/4 and Eth2/5.

C. Agg-1 and Agg-2 switches receive broadcast packets and does not forward them to the peer link or the port channel.

D. Only Agg-1 switch receives broadcast packets and does not forward to the peer link on Agg-2 switch.

Refer to the exhibit.

Server1 is connected to a Cisco Nexus 9000 Series Switch via a 1-Gb port channel. The storm control is applied to the Eth0 device with a zero percent value. What does the switch do to traffic that traverses the switch interfaces during the streaming window that exceeds the bandwidth of the interfaces?

A. forwards all traffic

B. forwards half of the traffic

C. suppresses all traffic

D. drops all of the excess traffic

Where does the witness VM reside in a Cisco Hyperflex Edge deployment?

A. Windows application

B. Hyper Rex Data Platform

C. Cisco Intersight

D. local HyperFlex datastore

A network administrator is using the Cisco ESA with Cisco AMP to upload files to the cloud for analysis. The network is congested and is affecting communication. How will the Cisco ESA handle any files which need analysis?

A. Cisco AMP calculates the SHA-256 fingerprint, caches it, and periodically attempts the upload.

B. The Cisco ESA immediately makes another attempt to upload the file.

C. The file is queued for upload when connectivity is restored.

D. The file upload is abandoned.

A network engineer must perform a backup and restore of the Cisco Nexus 5000 Series Switch configuration. The backup must be made to an external backup server. The only protocol permitted between the Cisco Nexus switch and the backup server is UDP. The backup must be used when the current working configuration of the switch gets corrupted.

Which set of steps must be taken to meet these requirements?

A. 1 Perform a startup-config backup to an FTP server. 2 Copy startup-config in the boot flash to the running-config file

B. 1 Perform a running-config backup to an SFTP server 2 Copy backup-config from the SFTP server to the running-config file

C. 1 Perform a running-config backup to an SCP server 2 Copy running-config in the boot flash to the running-config file

D. 1 Perform a startup-config backup to a TFTP server 2 Copy backup-config from the backup server to the running-config file

An engineer must configure multiple EPGs on a single access port in a large Cisco ACI fabric without using VMM integration. The relevant access policies and tenant policies have been created. A single AAEP is used to configure the access port in the fabric. Which two additional steps must be taken to complete the configuration? (Choose two.)

A. A contract must be defined between the EPGs

B. The EPGs must be linked to the correct physical domain

C. The EPGs must link directly to the corresponding AAEP

D. The corresponding bridge domains must be configured in legacy mode

E. The EPGs must be configured as static ports

Refer to the exhibit.

A network engineer must configure an authentication solution for Cisco UCS with these conditions:

1.

Two-factor authentication must be enabled for all UCS user authentication.

2.

All AAA packets must be encrypted and use TCP port 49 to establish communication.

Which set of actions needs these requirements?

A. Create the LDAP provider. Change the LDAP group rule in an LDAP provider.

B. Create the RADIUS group mapping. Change the RADIUS group rule in a RADIUS provider.

C. Remove the LDAP provider. Create a TACACS+ provider in user management.

D. Delete the LDAP group mapping. Create a RADIUS provider in user management.

What is the impact of a nondisruptive upgrade on fabric and modular switches?

A. The upgrade disrupts the control plane for more than 120 seconds.

B. During the upgrade, new devices cannot log in to the fabric.

C. If a zone server merge is in progress, the upgrade continues without interruption.

D. When the installation is complete, the system BIOS must be updated.