3203 Online Practice Questions and Answers

Greg calls Judy, who is not available. The call is transferred to an application server (named App1). App1 handles the call where a call answer message was recorded. The network connectivity to the storage server is lost and Judy logs into another application server in the cluster (App2). What is the expected outcome?

A. Judy logs in successfully but is informed that the systemisin offline mode, and cannot listen the new message that was left by Greg.

B. Judy logs in successfully but is informed that the system is in offline mode. She is still able to listen to the latest message that was recorded by Greg.

C. Judy's login is not successful as her password cannot be validated as the system is in offline mode.

D. Judy can retrieve the new message if she logs into App1 but not when she logs into App2.

Which types of servers can be used for storing messages addressed to users in Avaya Aura Messaging Rls.6.1?

A. Avaya Message Storage only

B. Avaya Message Storage or Microsoft Exchange

C. Avaya Message Store, Microsoft Exchange or Lotus Domino

D. Avaya Message Store, Microsoft Exchange or Lotus Zimbra

You are attempting to load the Aura Messaging template from within System Platform but it is falling ill due to an "Insufficient resources to install this template- error. What would cause this error?

A. The RAID array is corrupt and should be rebuilt using the RAID tool.

B. The server on which you are attempting to install the template has a failed hard drive which needs to be replaced.

C. The wrong template is being usedor the server type.

D. An incorrect version of System Platform has been installed.

A user with an Avaya Aura Messaging mailbox on a Zimbra server does not receive voice mails deliver to the Zimbra mailbox even though the user's colleagues have been leaving messages. Other users with Zimbra mailboxes are receiving their voice mails. The other users who are receiving their voicemails are on a different Zimbra mailbox server even though the Zimbra LDAP server is the same for all users. What is the first step you would use to diagnose the problem?

A. Check the SMTP Connection diagnostic from the Messaging SMI.

B. Check the active alarm log.

C. Re-administer the Zimbra server.

D. Send an email message to the user's Zimbra e-mail address.

An Aura Messaging system has been reloaded and had a restore performed on it. Everything is working correctly except that users are having problems sending messages to voicemail boxes on remote voicemail machines. What is causing the problem?

A. The technician performing the restore did not manually request updates from the remote machines.

B. The remote subscriber information was not backed up prior to the reload.

C. The Aura Messaging system is not plugged into the customers LAN.

D. The FQDN of the remote machine was changed so messages cannot be delivered.

You have Just finished installing the last Avaya Aura Messaging Application server in a multi- server configuration. You attempt to reload the User List from this last Application Server but find that reload fails and presents an error message. The User List reload was successful on the other servers. What are two reasons you are receiving this error? (Choose two.)

A. The Application Server is not listed in the Topology configuration on Message Store.

B. The Application Server and the Message Store are not on the same network subnet.

C. An "A" Name record for the Application Server is entered in the DNS.

D. The AxC Address is incorrectly entered on the Application Server.

E. The Application Server has not been configured as a part of the Cluster.

What time does an Aura Messaging system perform its automatic backup routine?

A. at 1:05 AM every weekday

B. as scheduled by installer

C. at 3:05 AM everyday

D. at noon Monday, Wednesday, Friday

What is true In relation to Avaya Aura Messaging system topologies?

A. In a front- end/back end topology in which roles are split between servers, the application role the back end and the storage role is the front end.

B. In a single server topology, the storage role integrates with the telephony server.

C. In a decentralized topology, application servers are typically located with the sites they support.

D. In a centralized topology, all thestorage servers in a network arelocated with the site they support.

You have currently setup the dial rules on two clustered application role severs. To enable E.164 for your telephony integration, you must reconfigure your dial rules based on site definitions What is the correct work flow?

A. Re-enter the dial rule definitions in the SMI Sites page on the storage role server

B. On each application role server, select "Application server based (AAM 6.0 legacy style) as the Dial plan handling style and re enter the dial rule definitions In the System Management Interface (SMI) Sites page on the storage role server

C. Re enter the dial rule definitions in the SMI Sites page on the storage role server and select the "Site definition based" as the Dial plan handling style on each application role server.

D. On each application role server, select "Application server based (AAM 6.0 legacy style)" as the Dial plan handling style.

A system administrator is concerned over the number of simultaneous SMTP sessions on their Messaging Server. Which report would show the administrator the maximum simultaneous SMTP sessions by hour?

A. IMAP/SMTP Traffic report

B. Internet Messaging report

C. System Evaluation report

D. SMTP Snapshot

You are using the server console to install System Platform software on an Avaya Aura Messaging server. You have turned on the server. Inserted the DVD software into the DVD drive, and the Avaya screen is displayed. Allot about 30 seconds the system displays a 'waiting for Telnet connection-message and the installation process halts. Which process will allow you to continue using the server console to complete the installation?

A. Eject the DVD from the server and verify you have the correct software.

B. Insert the System Platform DVD again and wait three minutes for the installation to continue.

C. Reset the server to restart the installation. Within 30 seconds of the system displaying the Avaya screen, press Enter or type "vspmediacheck" to verily the image on the DVD is not corrupt.

D. Disable Telnet services by entering the command "disable telnet" then reset the server.

E. The server console cannot be used for installation of System Platform software. You must establish a Telnet/SSH session from your laptop to continue the installation.

In preparation for an installation of an Avaya Aura Messaging (AAM) server, you notice the customer's provided server rack contains several other existing components but that it meets the space and physical requirements to house the addition of a new AAM server. What should you do?

A. Continue with the installation of the new server as the existing servers in the rack are running fine and no problems have been experienced.

B. Advise the customer that the installation requirements call for power to be supplied from a non- switched electrical outlet and that the total rack load power draw needs to be evaluated prior installing the server.

C. Move the server rack closer to another wall mounted electrical outlet so that the new server can be plugged directly into the wall.

D. Test the power load of the rack by plugging the new server in prior to installing it to see if it will power up.

During installation of the Avaya Aura Messaging system, the customer decides to change the server names to reflect their geographical location. Allot making the name changes on each server, you start security alerts when you try to log into any of the servers. How would you correct this?

A. The temporary Internet files need to be deleted from your browser.

B. The /etc/hosts file on your computer must be changed to reflect the new server names.

C. You must update the server certificate after changing the server name.

D. You must delete any previously installed certificates from your computer and reinstall fresh certificates.

To finalize the installation of your Avaya Aura Messaging system, you want to test alarm organization which screen in the System Management Interface do you send a test alarm?

A. Messaging > Utilities

B. Messaging > Diagnostics

C. Server (maintenance) > Server Administration

D. Server (maintenance) > Alarms

You are completing the installation tasks for an Avaya Aura Messaging server and are ready to install the Messaging software. Prior to loading the software, which three steps must be completed before proceeding? (Choose three)

A. System Platform software has been loaded with the latest approved patches and service packs

B. Planning forms for installing Messaging have been printed arid are available.

C. The Messaging service is running on the Application server.

D. "Pop-ups" are enabled in your Web Browser.

E. A trusted server has been created in the Storage server.