31860X Online Practice Questions and Answers

Yourare designing an addition to a customer's existing Avaya Aura system. The addition will include 575 IP sets, of which 200 will also use Avaya Equinoxfor the Desktop, 175 will use Desktop P2P Video, and 25 of them will also need Extension to Cellular (EC500). There are 75 other new users who will use Avaya Equinoxfor iOS as their only UC Client or endpoint. The customer does not want a la carte licensing for applications not covered by Core Suite, and will purchase other Avaya Aura Suites as required.

How many Core Suite licenses are needed for the addition?

A. 675

B. 650

C. 625

D. 575

A design you are working on calls for several "G series" media gateways, and you have determined the number of Digital Signal Processor (DSP) resources that are needed.

In which two ways can you determine how many "G series" gateways are needed in a design? (Choose two.)

A. Divide the calculated number of DSPs by 320 to determine how many G450s are needed.

B. Divide the calculated number of DSPs by 120 to determine how many G430s are needed.

C. Divide the calculated number of DSPs by 340 to determine how many G450S are needed.

D. Divide the calculated number of DSPs by 128 to determine how many G430s are needed.

The following endpoints are being requested for an Avaya Aura solution:

300 9611G telephones running H.323 100 9641GS telephones running SIP 50 J129 telephones 50 Analog telephones 20 DCP telephones 75 Avaya Equinoxclients

How many registrations will Session Manager have to support?

A. 225

B. 175

C. 100

D. 75

You are designing media gateways at remote locations for a customer. They have requested the following:

Analog telephone calls go through the PSTN in case of power outage. Redundant power supply The same administrative and telephone functionality during WAN outage

Which design meets these customer requests?

A. A design with G450 gateways with dual power supplies, and Standard Local Survivability

B. A design with G430 gateways with dual power supplies, and Standard Local Survivability

C. A design with G450 gateways with dual power supplies, and S8300 Survivable-Remote

D. A design with G430 gateways with dual power supply, and S8300 Survivable-Remote

On an Avaya Aura 7.x deployment with shuffling turned on within Communication Manager (CM), which statement describes the media processing resources or Digital Signaling Processor (DSP) requirements for a SIP-SIP two-party call between endpoints using the same codec?

A. This call will shuffle after initial call set-up; i.e., one media-processing (DSP) channel is required for the first 20 seconds of the call, for each party.

B. This call cannot shuffle, and two media-processing (DSP) channels are required for the entire call duration.

C. SIP-SIP two-party calls will use SIP Direct Media, so no media-processing (DSP) channels are required for this call.

D. SIP-SIP multi-party calls do not shuffle, and after setup use one media processing (DSP) channel for the entire call..

A customer with an Avaya Aura Platform requires survivable remote capabilities at their new branch location. The new branch location must also support five analog telephones and two Tl trunks.

What will address these requirements?

A. Communication Manager and Session Manager on Appliance Virtualization platform with local data switch

B. Communication Manager on Appliance Virtualization platform with local data switch

C. G430 with embedded S8300 with needed media modules

D. G450 with embedded S8300 with needed media modules

In a discussion with your customer you are explaining local survivability and the SIP Trunkingfunctionality provided by a Branch Session Manager.

Which two statements would be a part of your discussion? (Choose two.)

A. The Local Survivable Processor (LSP) connects directly to the SIP Service Provider.

B. The control of the branch SIP telephones transfers from the core network Session Manager to the Branch Session Manager.

C. Outgoing calls from the branch are routed through the LSP and branch gateway before going to the SIP Service Provider.

D. The branch gateways connect with the Local Survivable Processor (LSP), which serves as the controller.

A customer with an existing Communication Manager 6 (CM) duplex solution with g4bos and isdn trunks at their main location, is adding some remote sites with G430 gateways and local ISDN trunks for survivability and local calling. They will be inter-connecting them with an MPLS network with limited bandwidth to these remote sites. They want a network design that will restrict voice traffic to a defined level with the ability to overflow to the PSTN.

What would be the minimum network region design look like?

A. One IP network region per remote location, one intervening network region, G.729 inter- region codec, implement Call Admission Control (CAC) with Inter-gateway Alternate Routing (IGAR)

B. Two IP network regions per remote location, (one for the gateway, and one for the telephones), one intervening network region, G.729 inter-region codec,implement Call Admission Control (CAC) with Inter-gateway Alternate Routing (IGAR)

C. One IP network region per remote location, connect each remote network region directly to the main site's network region, G.729 inter-region codec, implement Call Admission Control (CAC) with Inter-gateway Alternate Routing (IGAR)

D. One IP network region per remote location, two Intervening network regions, G.729 inter-region codec, implement Call Admission Control (CAC)

In an Avaya Aura 8.1 deployment, where do Remote SIP Workers ultimately register?

A. Session Manager

B. Communication Manager

C. Avaya Device Adapter

D. System Manager

A customer wants to prevent additional calls from being established, and to preserve the quality active calls when the capacity limit on the WAN link is reached. The branch inter- office communication use rate is one trunk for every 20 users over the customer's star topology WAN. 600k of the WAN bandwidth is dedicated to voice.

Assuming G.729 (30k bandwidth per call) is used, which Call Admission Control (CAC) limit will meet the customer s requirement?

A. Set the CAC limit to 10 incoming calls and 10 outgoing inter-branch calls at each branch.

B. Set the CAC limit to 200 intra-branch calls globally in the WAN network.

C. Set the CAC limit to 2 Mbps just for voice traffic at the headquarters main office WAN connection.

D. Set the CAC limit to 20 inter-branch calls for each branch location.

A customer has provided the following requirements for a basic telephone user:

Two line appearances Basic telephony 3 rings then cover to voice mai"; No shared line appearances Cheapest telephone Possible low power requirements

Which telephone type would be a good choice for the basic user?

A. 9611G

B. 9641

C. J129

D. J179

Your customer is migrating CS1000 devices to Avaya Aura and is asking what role the Avaya Device Adapter plays.

Which two statements about an Avaya Device Adapter are true? (Choose two.)

A. It is a Breeze?Snap-in that provides CS1000 endpoint Call Park and Page functionality.

B. It is a Breeze?Snap-in that allows CS1000 endpoint registration with Communication Manager.

C. It is a Breeze?Snap-in that allows CS1000 endpoint feature support from Communication Manager.

D. It is a Breeze?Snap-in that allows CS1000 endpoint registration with Session Manager.

Your customer has a CTI application that requires Avaya Aura Application Enablement Services (AES). To work with AES, how must Communication Manager be operating?

A. In a survivable remote mode

B. In the Avaya Aura Core

C. As a Feature Server

D. As an Evolution Server

You are designing a Communication Manager (CM) 8 solution with centralized ISDN trunks at the main site and two remote gateway locations. Each remote location will be connected to the main server via dedicated, point-to-point WAN service. Main - CM 8.1 duplex pair with 2-G450s and 250 IP stations Remote 1 - S8300E LSP/G450 with 125 IP stations Remote 2 - S8300E LSP/G430 with 30 IP stations.

To ensure that no one site Is overwhelmed by CM traffic, what is the recommended number of network regions required for this design?

A. 7 regions: 1 at the main, 1 at each remote site, 1 for each site's IP telephones, and one for the virtual network region

B. 4 regions: 1 at the main, 1 at each remote site, and 1 for the virtual network region

C. 3 regions: 1 at the main, and 1 at each remote site

D. 6 regions: 1 at the main, 1 at each remote site, and 1 virtual network region for each site

A customer has a single size with 2,500 users. They want a solution that provides hardware redundancy. The failure of a single component should not be service impacting.

Given these parameters, what would satisfy their request?

A. Communication Manager Duplex

B. Communication Manager S8300

C. Communication Manager Simplex with Survivable Core

D. Communication Manager Simplex with Survivable Remote