Cascade Profiler provides identity information collected from Active Directory 2008 by installing and correctly configuring the 'Cascade Connector' agent software on:
A. Every DNS server in the AD environment
B. Any server in the MS domain
C. Every client desktop in the AD environment
D. Every NTP server in the MS domain
E. The Microsoft Event Collector component in the AD environment
When links in a network are using WAN optimization, it is best if the Cascade Profiler or Express receives data from a _________or _________ monitoring traffic on the LAN side of the Steelhead that is located on the server side of the optimized connection. This is necessary in order to determine server delay. (Select 2)
A. Cascade Shark
B. Router
C. Layer 3 switch
D. Steelhead appliance
E. Cascade Sensor
On a newly created capture job on Cascade Shark appliance, by default, trending/indexing arE. (Select 2)
A. Enabled
B. Disabled
C. Set to retain up to 1 week or 10GB of indexing/trending data
D. Set to retain up to 1 week or 10GB of packets
E. Set to keep the indexing/trending data indefinitely
In Cascade, how are custom Layer 7 applications configured?
A. On the Sensor, you must define either a hex string, text string, or URL.
B. On the Profiler, you must define either a hex string, text string, or URL.
C. On the Gateway, you must define either a hex string, text string, or URL.
D. You have to first enable security analytics on the Profiler, then you define either a string or URL on either the Profiler or the Sensor.
E. Custom applications cannot be defined, but the Sensor can identify most off-the-shelf programs.
Common TCP Errors which may be observed within a network include:
A. Zero Window Size, Retransmits, or FIN Flags observed
B. Increasing Window Size, Resets, Retransmits
C. Zero Window Size, Retransmits, Lost Packets
D. SYN, FIN, or RST flags observed
E. RST or FIN flag observed or Retransmits observed
What must happen prior to running WAN Optimization reports on Cascade Profiler?
A. Host Groups must be configured.
B. Cascade Profiler must be successfully polling Steelhead appliances via SNMP.
C. The WAN-Steelhead interface group must be populated with WAN interfaces for all Steelhead appliances.
D. The Profiler baseline collection must be complete.
E. A WAN Optimization reporting template must be configured.
What are the three sections of a Cascade Service Incident Report page? (Select 3)
A. Event List
B. Exception List
C. Report Criteria
D. Alarm List
E. Event Summary
What types of Layer-7 Application Signatures are available within the Cascade Profiler GUI? (Select 3)
A. By URL
B. By Regular Expression
C. By Packet Start offset
D. By ASCII String
E. By Hex String
F. By Error Code Type