210-015 Online Practice Questions and Answers

You are asked to upgrade the version of the Cisco Nexus 1000V sofware on the Vblock System 320. Which component are you upgrading on the hypervisor?

A. Service Console

B. Virtual Supervisor Module (VSM)

C. Virtual Ethernet Module (VEM)

D. Virtual Network Interface Card (vNIC)

Which steps should be performed to install PowerPathVE updates to the ESXi host through VMware Update Manager (VUM)?

A. Enter maintenance mode, import patches, create the baseline, atach the baseline, and remediate host.

B. Disconnect the ESXi host, import patches, create the baseline, atach the baseline, and remediate host.

C. Import patches, create the baseline, atach the baseline, and install updates.

D. Import patches, reboot the ESXi host, create the baseline, atach the baseline, and remediate host.

You upgrade an ESXi 4.x host to an ESXi 5.x host using VMware Update Manager. It appears to complete the installaton, but the system does not boot. You decide to roll back the host to the previous build. Afer using the Shif-R opton on boot up, you receive the error "No alternatve hypervisor to roll back to". What is causing this error?

A. The hardware is not supported with the ESXi 5.x.

B. The ISO fle in the baseline is corrupt.

C. The data store containing the operatng system has become corrupt.

D. There are diferences in the boot loaders between the two versions.

Which two methods would you use to deploy an ESXi image created with Image Builder CLI? (Choose two.)

A. using Symantec Ghost

B. using a USB drive

C. burning it to an installaton DVD

D. using the Auto Deploy feature in vCenter Server

Which VNX drive type should be used for ESXi boot LUNs?

A. largest available NL-SAS

B. largest available SAS

C. smallest available SAS

D. smallest available EFD

Which ESXi CLI command is used when installing VIB fles on an ESXi host?

A. esxcfg vib install

B. esxcli system vib install

C. vicfg-module vib install

D. esxcli sofware vib install

Which statement is correct about using VMware Inventory Services?

A. It tracks virtual machine locatons in the data center.

B. It improves administratve user performance and reduces trafc with the vCenter.

C. It tracks data center objects and performs reports.

D. It improves virtual machine responsiveness.

A customer has recently acquired some new Cisco UCS B440 M3 blades to install in their existng Vblock

System. You are asked to add these new blades to the existng vSphere cluster and to ensure full

compatbility with the existng environment.

Which acton must you perform?

A. Enable EVC mode with a feature set of the existng CPU level to ensure compatbility with the new blades.

B. Enable EVC mode with a feature set of the newer CPU level to ensure compatbility with the existng blades.

C. Disable VMware HA prior to adding the new blades to the cluster.

D. Modify the limit CPUID value advanced setng on the existng blades to ensure compatbility with the new blades.

Your client wants all required storage space for the virtual disk to be allocated at creaton tme. The data remaining on the physical device should be zeroed out when the virtual disk is created. Which storage provision type will allow you to meet your client's requirements?

A. thick LUN provisioning, eager zeroing

B. thin LUN provisioning, eager zeroing

C. thin LUN provisioning, lazy zeroing

D. thick LUN provisioning, lazy zeroing

You are preparing to upgrade the Vblock System to the latest release certfcaton matrix and have a custom ISO fle for the vSphere ESXi build on the vCenter server in the DTemp folder. Which process would you use to build and atach a host upgrade baseline?

A. Ensure you have Upload fle privileges; launch vCenter; open VUM; import the ESXi image; atach the baseline to the target; create a baseline image.

B. Launch vCenter; ensure you have Upload fle privileges; open VUM; import the ESXi image; create a baseline image; atach the baseline to the target.

C. Launch vCenter; import the ESXi image; ensure you have Upload fle privileges; open VUM; create a baseline image; atach the baseline to the target.

D. Launch vCenter; import the ESXi image; ensure you have Upload fle privileges; open VUM; create a baseline image; atach the baseline to the target.

A user must be granted a virtual machine administrator role on all hosts with the ability to only take

snapshots of VM1 on ESXi02.

Which two steps are required to accomplish this task? (Choose two.)

A. At the vCenter level, add the user to the virtual machine administraton role.

B. From each vSphere host, assign the user to the virtual machine administraton role, and ensure all privileges have been granted.

C. At the virtual machine level, ensure the ability to take snapshots is allowed, and all other privileges are unselected on VM1.

D. At the host and cluster level, ensure the ability to take snapshots is allowed, and all other privileges are unselected on VM1.

What are three approved VCE security guidelines for use in the Vblock System? (Choose three.)

A. Ensure that the vpxuser auto-password change meets policy.

B. Disable SSL for Network File Copy (NFC).

C. Enable the ESXi frewall on all hosts.

D. Confgure the remote Syslog for VMware ESXi hosts.

E. Use independent nonpersistent disks.

During an upgrade engagement of a Vblock System, the customer realizes that they no longer have the credentals for the service account that are being used for the vCenter services. Due to tme constraints, they recommend using the user credentals of the system administrator untl the customer security team can be engaged to reset the service account password. Afer the upgrade completes, the vCenter services will not start. Which log fle in the CProgramDataVMwareVMware VirtualCenterLogs directory contains informaton relevant to troubleshootng the problem?

A. tomcatlogscatalina.date

B. vpxd.log

C. drmdump

D. vpxuser.log

You place a data store into maintenance mode and the process hangs at one percent. Which two solutons will resolve this problem? (Choose two.)

A. Verify if storage DRS is disabled on the disk and enable it if necessary.

B. Verify if there are any storage rules that are preventng storage DRS from making migraton recommendatons and correct them.

C. Increase the number of failover hosts in the cluster DRS confguraton.

D. Restart remote management agents on all the hosts in the cluster.

The Advanced Management POD (AMP) ESXi cluster is performing much slower than expected. Which command would you use to investgate the slow response in real tme?

A. esxtop

B. esxcfg-info

C. vmkfstools

D. vm-support