You plan to use the Automated Installer (AI) to install a nonglobal zone named zone1. You created custom manifest for the nonglobal zone and named it zone1manifest. Which command must you use to add this custom manifest to the s11sparc install service and associate this custom manifest with the nonglobal zone?

A. installadm create-profile n s11-sparc f /term/zone1manifest.xml c zonename="zone1"

B. installadm create-manifest n s11-sparc f /term/zone1manifest.xml m zone1manifest c zonename="zone1"

C. installadm create-client n s11-sparc f /term/zone1manifest.xml m zone1manifest c zonename="zone1"

D. installadm create-server n s11-sparc f /term/zone1manifest.xml m zone1manifest c zonename="zone1"

Consider the following commands and output on the local server:

Also, consider the following route table entry on a remote system:

192.168.2.0 192.168.1.200 UG 1 1

You must configure a virtual switch to connect over net0 to the remote system. Select two commands that complete the configuration.

A. ipadm set-ifprop p forwarding=on net0

B. ipadn set-prop p forwarding=on vnic2

C. ipacim set-prop p forwarding=on ipv4

D. ipadm set-prop p routing=on net0

E. routeadm ue ipv4-forwarding

F. routeadm ue ipv4-routing

Your company has set a policy that all Oracle Solaris 11 instances must have a backup boot environment created whenever software packages are added, removed, or updated. The current boot environment must not be modified. The backup boot environment must represent the system image before the procedure and the new boot environment must represent the image before the procedure. The image properties on your system are as follows:

You are instructed to install the top utility.

Which two will allow the top package to be installed on the system while adhering to the company policy?

A. pkg property pkg-install=backup-be pkg install top

B. pkg set-property be-policy create-backup pkg install top

C. pkg install --be-name BE2 top

D. pkg set-property be-policy always-new pkg install top

E. pkg set-property create-backup true pkg install top

What is true regarding an IPMP group?

A. All underlying interfaces are physical Ethernet links.

B. All interfaces connect to the same switch.

C. It does not persist across reboots.

D. Testing for failover can be done using the ipadm delete-ipmp command.

You have a server that has two zones configured. These zones use the pool named pool_zones. Examine the following configuration information:

The system has four CPUs. Assume that both zones are under heavy load. Examine the following partial output:

Which option describes the values you would expect to see for the CPU field for the zones?

A. approximately 40% for z1 and approximately 60% for z2

B. approximately 60% for z1 and approximately 40% for z2

C. approximately 20% for z1 and approximately 30% for z2

D. approximately 30% for z1 and approximately 20% for z2

E. approximately 25% for z1 and approximately 25% for z2